Gears
Manufacturer:
Chooch Enterprises
Manufacturer ID:
7282
Category:
Gears
Name:
120-ton Steam Boiler Equipment
Gauge:
multi
Product Type:
Plastic Kit
Finish:
(unknown)
Notes:
The Chooch set consists of two gears, one gear mount, a flywheel, and a Scotch marine boiler mounted on cribbing. The set is marketed by Chooch as usable for "HO-scale or larger". Ed used the parts from two sets to provide loads for the cars shown in the other photos. Photo #2 shows two flywheels and the gears in an S Scale America 40-foot gondola (placed on some wooden cribbing). Photo #3 shows the two large gears, mounted on brackets, which Ed glued in a Branch Line Models ACL 40-foot gondola. Photo #4 shows the boilers from two kits placed on an S-Helper Service flat car. These measure 1-3/4" in diameter and fit perfectly across the car's deck. Ed glued the loads to the flat car, and placed stakes in the stake pockets next to the loads. Chooch also sells smaller versions of these boilers (parts #7280 40-ton/small and #7281 80-ton/medium). Also covered in the "Loads for S Scale Open Top Cars" article by Ed in the 2010 Fall issue of the 1:64 Modeling Guide magazine.
(image copyright © (Chooch Enterprises stock photo))
(image copyright © Ed Kirstatter)
(image copyright © Ed Kirstatter)
(image copyright © Ed Kirstatter)
Manufacturer:
Multiscale Digital
Category:
Gears
Name:
Double Helical Tooth Mill Pinions
Prototype Manufacturer:
Mesta Machine
Model Introduced:
2021
Product Type:
3D-printed Plastic
Finish:
unpainted
(image copyright © (Multiscale Digital stock photo))
Manufacturer:
Multiscale Digital
Category:
Gears
Name:
Flywheel Gearbox Bethlehem Steel
Prototype Manufacturer:
Loewy
Model Introduced:
2022
Product Type:
3D-printed Plastic
Finish:
unpainted
(image copyright © (Multiscale Digital stock photo))
Manufacturer:
Model Tech Studios (click for web site)
Manufacturer ID:
SD0007
Category:
Gears
Name:
Industrial Gears
Product Type:
Resin
Finish:
unpainted
Notes:
Gears and flywheels.
(image copyright © (Model Tech Studios stock photo))
Manufacturer:
Multiscale Digital
Category:
Gears
Name:
Massive Geared Pulley
Prototype Manufacturer:
Bethlehem Steel
Model Introduced:
2021
Product Type:
3D-printed Plastic
Finish:
unpainted
Notes:
Figure shown for size perspective only.
(image copyright © (Multiscale Digital stock photo))
(image copyright © (Multiscale Digital stock photo))
Manufacturer:
Multiscale Digital
Category:
Gears
Name:
Rope Pulley
Prototype Manufacturer:
Bethlehem Steel
Model Introduced:
2022
Product Type:
3D-printed Plastic
Finish:
unpainted
(image copyright © (Multiscale Digital stock photo))