Product Gallery: Trucks by bigfourroad

Manufacturer:bigfourroad (click for web site)
Category:Vulcan
Year Introduced:2019
Product Type:3D-printed
Gauge:Standard-gauge
This Vulcan C-16 sideframe was used on the Fowler cars of the D&RGW and the Rock Island railroads. The print produces one sideframe. A matching bolster is available separately. Designed for pointed-axles and NWSL springs. This truck was designed by Dr. Scott McKenzie. Please note that the 3D-print (shown in the photo) did not come out as designed, so they are currently seeing if this can be produced by Shapeways.
Photo
 
photo © Chris Rooney
Manufacturer:bigfourroad (click for web site)
Category:Vulcan
Year Introduced:2019
Product Type:3D-printed
Gauge:Standard-gauge
This standard Vulcan sideframe was used on the Fowler cars of the C&NW and the CM&O railroads. The print produces one sideframe. A matching bolster is available separately. Designed for pointed-axles and NWSL springs. This truck was designed by Dr. Scott McKenzie.
Photo
 
photo © Chris Rooney
Manufacturer:bigfourroad (click for web site)
Category:Vulcan
Year Introduced:2019
Product Type:3D-printed
Gauge:Standard-gauge
This is the bolster for the two Vulcan sideframes this company makes available via Shapeways. This truck was designed by Dr. Scott McKenzie.
Photo
Photo #2
 
photo © (bigfourroad stock photo)

Copyright © 2019 NASG, Inc.; all rights reserved